Pair of Corinthian style capitals to suit door architrave K200. These decorative capitals have been specially profiled at either side to allow you to run K200 pilaster into them. Can be installed as a decorative door architrave or use to frame a wide opening between two open plan rooms or an alcove. You will receive 1 left capital and 1 right handed capital. Place at either side of your door and use K200 as the architrave along the top and bottom. The K200 can be cut down to width required or order additional lengths and join together if you have a wide opening. Complete the look with plinth block D320 at the bottom of your door frame.
One standard or double width door requires – 1 x K201L/R, 3 x K200 & 2 X D320
Our range of Orac flat pilasters and capitals are made of tough polyurethane, are highly durable and are primed ready for a final coat of paint.
Product Material – Lightweight Duropolymer. Suitable for both interior and exterior use.
K201 L/R Capitals – 22.8cm Wide x 6.2cm Projection x 14.9cm High
TOP TIP – The K200 pilaster / architrave is available in 2 metres lengths and if you are doing one door, you will need to order 3 of these. If you have a standard door width, then the cut piece leftover from the top section will normally be enough to cover a 2nd door.
Please call or email if you require any advice when selecting the parts needed for your decorative door architrave.